Together, grid cells' activity within a grid cell module forms a 2D torus [9, 20].

Autonomous Ground Robots (AGRs) face significant challenges due to limited energy reserve, which restricts their overall performance and availability. Prior research has focused separately on energy-efficient approaches and fleet management strategies for task allocation to extend operational time. A fleet-level scheduler, however, assumes a specific energy consumption during task allocation, requiring the AGR to fully utilize the energy for maximum performance, which contrasts with energy-efficient practices. This paper addresses this gap by investigating the combined impact of computing frequency and locomotion speed on energy consumption and performance. We analyze these variables through experiments on our prototype AGR, laying the foundation for an integrated approach that optimizes cyber-physical resources within the constraints of a specified energy budget. To tackle this challenge, we introduce PECC (Predictable Energy Consumption Controller), a framework designed to optimize computing frequency and locomotion speed to maximize performance while ensuring the system operates within the specified energy budget. We conducted extensive experiments with PECC using a real AGR and in simulations, comparing it to an energy-efficient baseline. Our results show that the AGR travels up to 17\% faster than the baseline in real-world tests and up to 31\% faster in simulations, while consuming 95\% and 91\% of the given energy budget, respectively. These results prove that PECC can effectively enhance AGR performance in scenarios where prioritizing the energy budget outweighs the need for energy efficiency.

In this paper, we examine the problem of information storage on memristors affected by resistive drift noise under energy constraints. We introduce a novel, fundamental trade-off between the information lifetime of memristive states and the energy that must be expended to bring the device into a particular state. We then treat the storage problem as one of communication over a noisy, energy-constrained channel, and propose a joint source-channel coding (JSCC) approach to storing images in an analogue fashion. To design an encoding scheme for natural images and to model the memristive channel, we make use of data-driven techniques from the field of deep learning for communications, namely deep joint source-channel coding (DeepJSCC), employing a generative model of resistive drift as a computationally tractable differentiable channel model for end-to-end optimisation. We introduce a modified version of generalised divisive normalisation (GDN), a biologically inspired form of normalisation, that we call conditional GDN (cGDN), allowing for conditioning on continuous channel characteristics, including the initial resistive state and the delay between storage and reading. Our results show that the delay-conditioned network is able to learn an energy-aware coding scheme that achieves a higher and more balanced reconstruction quality across a range of storage delays.

Private inference (PI) has emerged as a promising solution to execute computations on encrypted data, safeguarding user privacy and model parameters in edge computing. However, existing PI methods are predominantly developed considering constant resource constraints, overlooking the varied and dynamic resource constraints in diverse edge devices, like energy budgets. Consequently, model providers have to design specialized models for different devices, where all of them have to be stored on the edge server, resulting in inefficient deployment. To fill this gap, this work presents AdaPI, a novel approach that achieves adaptive PI by allowing a model to perform well across edge devices with diverse energy budgets. AdaPI employs a PI-aware training strategy that optimizes the model weights alongside weight-level and feature-level soft masks. These soft masks are subsequently transformed into multiple binary masks to enable adjustments in communication and computation workloads. Through sequentially training the model with increasingly dense binary masks, AdaPI attains optimal accuracy for each energy budget, which outperforms the state-of-the-art PI methods by 7.3\% in terms of test accuracy on CIFAR-100. The code of AdaPI can be accessed via https://github.com/jiahuiiiiii/AdaPI.

In the rapidly evolving Internet of Things (IoT) domain, we concentrate on enhancing energy efficiency in Deep Learning accelerators on FPGA-based heterogeneous platforms, aligning with the principles of sustainable computing. Instead of focusing on the inference phase, we introduce innovative optimizations to minimize the overhead of the FPGA configuration phase. By fine-tuning configuration parameters correctly, we achieved a 40.13-fold reduction in configuration energy. Moreover, augmented with power-saving methods, our Idle-Waiting strategy outperformed the traditional On-Off strategy in duty-cycle mode for request periods up to 499.06 ms. Specifically, at a 40 ms request period within a 4147 J energy budget, this strategy extends the system lifetime to approximately 12.39x that of the On-Off strategy. Empirically validated through hardware measurements and simulations, these optimizations provide valuable insights and practical methods for achieving energy-efficient and sustainable deployments in IoT.

Mobile robots in unknown cluttered environments with irregularly shaped obstacles often face sensing, energy, and communication challenges which directly affect their ability to explore these environments. In this paper, we introduce a novel deep learning method, Confidence-Aware Contrastive Conditional Consistency Model (4CNet), for mobile robot map prediction during resource-limited exploration in multi-robot environments. 4CNet uniquely incorporates: 1) a conditional consistency model for map prediction in irregularly shaped unknown regions, 2) a contrastive map-trajectory pretraining framework for a trajectory encoder that extracts spatial information from the trajectories of nearby robots during map prediction, and 3) a confidence network to measure the uncertainty of map prediction for effective exploration under resource constraints. We incorporate 4CNet within our proposed robot exploration with map prediction architecture, 4CNet-E. We then conduct extensive comparison studies with 4CNet-E and state-of-the-art heuristic and learning methods to investigate both map prediction and exploration performance in environments consisting of uneven terrain and irregularly shaped obstacles. Results showed that 4CNet-E obtained statistically significant higher prediction accuracy and area coverage with varying environment sizes, number of robots, energy budgets, and communication limitations. Real-world mobile robot experiments were performed and validated the feasibility and generalizability of 4CNet-E for mobile robot map prediction and exploration.

Split Federated Learning (SFL) has recently emerged as a promising distributed learning technology, leveraging the strengths of both federated learning and split learning. It emphasizes the advantages of rapid convergence while addressing privacy concerns. As a result, this innovation has received significant attention from both industry and academia. However, since the model is split at a specific layer, known as a cut layer, into both client-side and server-side models for the SFL, the choice of the cut layer in SFL can have a substantial impact on the energy consumption of clients and their privacy, as it influences the training burden and the output of the client-side models. Moreover, the design challenge of determining the cut layer is highly intricate, primarily due to the inherent heterogeneity in the computing and networking capabilities of clients. In this article, we provide a comprehensive overview of the SFL process and conduct a thorough analysis of energy consumption and privacy. This analysis takes into account the influence of various system parameters on the cut layer selection strategy. Additionally, we provide an illustrative example of the cut layer selection, aiming to minimize the risk of clients from reconstructing the raw data at the server while sustaining energy consumption within the required energy budget, which involve trade-offs. Finally, we address open challenges in this field. These directions represent promising avenues for future research and development.

With the rapid development of Mobile Edge Computing (MEC), various real-time applications have been deployed to benefit people's daily lives. The performance of these applications relies heavily on the freshness of collected environmental information, which can be quantified by its Age of Information (AoI). In the traditional definition of AoI, it is assumed that the status information can be actively sampled and directly used. However, for many MEC-enabled applications, the desired status information is updated in an event-driven manner and necessitates data processing. To better serve these applications, we propose a new definition of AoI and, based on the redefined AoI, we formulate an online AoI minimization problem for MEC systems. Notably, the problem can be interpreted as a Markov Decision Process (MDP), thus enabling its solution through Reinforcement Learning (RL) algorithms. Nevertheless, the traditional RL algorithms are designed for MDPs with completely unknown system dynamics and hence usually suffer long convergence times. To accelerate the learning process, we introduce Post-Decision States (PDSs) to exploit the partial knowledge of the system's dynamics. We also combine PDSs with deep RL to further improve the algorithm's applicability, scalability, and robustness. Numerical results demonstrate that our algorithm outperforms the benchmarks under various scenarios.

Maintaining energy sufficiency of a battery-powered robot system is a essential for long-term missions. This capability should be flexible enough to deal with different types of environment and a wide range of missions, while constantly guaranteeing that the robot does not run out of energy. In this work we present a framework based on Control Barrier Functions (CBFs) that provides an energy sufficiency layer that can be applied on top of any path planner and provides guarantees on the robot's energy consumption during mission execution. In practice, we smooth the output of a generic path planner using double sigmoid functions and then use CBFs to ensure energy sufficiency along the smoothed path, for robots described by single integrator and unicycle kinematics. We present results using a physics-based robot simulator, as well as with real robots with a full localization and mapping stack to show the validity of our approach.